Zhengzhou Linker Medical Equipment Co., Ltd.
Let the world love China dental products!
Add to Cart
Three Connectors Dental Autoclave Sterilizer Dental Handpiece Lubricator
Introduction
This product is designed to clean and lubricate the handpiece easily and surely.
Three Connectors
Specification
| Voltage | AC120V10%~AC230V10% 50/60HZ |
| Weight | 6.8Kg |
| Input Voltage | 24.0VA |
| Air Pressure | 0.25~0.3Mpa(2.5~3.0kgf/cm2)(50~85psi) |
| Tank Capacity | 18L |
| Dimensions | W280*D275*H360mm |
Opreation Procedures
(1)Attaching Handpiece
1)Attaching air turbine handpiece(according to ISO9168)
1.Remove the bur from the handpiece.
2.Open the door of the unit, attach the handpiece to the joint ,and tighten the nut securely
3.Close the door securely.
2)Attaching E-type handpiece(according to ISO3964 type)
Straight Handpiece
1.For the straight handpiece, attach the supplied test bur and lock it
2. Open the door of the unit,and attach the handpiece to the E-type joint until it locks.
3. Close the door securely.
Contra Angle Handpiece
1. Remove the bur from the handpiece.
2. Open the door of the unit,and attach the handpiece to the E-type joint until it locks.
3. For the contra angle handpiece, point the bur insertion hole toward the door side and close the door securely.
(2)Cleaning and Lubricating
(3)Removing Handpiece
1)Removing air turbine handpiece
Open the door after the mode indicator lights again and cleaning and lubrication cycles has completely finished.Loosen the nut,and pull out the handpiece straight from the joint.
2)Remvoing E-type handpiece
Open the door after the mode indicator lights again and clearning and lubrication cycle has completely finished.Pull out the handpiece in axial direction while pressing the ixing release button of the E-type joint.
About us:
Web: www.zzlinker.com
Email: info@zzlinker.com
Mobile/WhatsApp/Wechat: 0086 13663715484